Solar Products
So why consider changing to lithium technology
Best Quality Lithium Batteries Australia
Protected
Internal battery protection system
Every AMPTRON® Battery comes with an Automatic Built-in Battery Protection System (BPS)
Every AMPTRON® Battery comes with an Automatic Built-in Battery Protection System (BPS)
AMPTRON® lithium batteries have a built-In Battery Protection System (BPS) designed to prevent damage to the cells will protect the battery from almost any external accidental occurrence that would normally cause damage. The internal BPS will automatically disconnect to prevent damage to the cells if the battery drains below 10 volts. It will automatically reconnect when the charger is turned on. This protects the battery from over-discharging and damaging the cells. This technology also protects the battery from overcharge, short circuit and reverse polarity.
Internal Features:
This Battery Protection System is designed to last throughout the life of the battery and provide reliable power for thousands of cycles.
CELL BALANCING
The BPS balances the cells by sending more current through the length way circuit boards and into cells with a lower voltage. The BPS will also discharge cells that exceed 3.65V during charging.
THERMAL FUSE
Internal Cell Safety Fuse
Our latest cell technology is manufactured with a internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
SAFETY VENT
High pressure safety vent
Each cell has a high pressure safety vent that will flip open to release energy and prevent explosion.
ELECTROLYTE
Flame Retardant Electrolyte
Our cells are manufactured with our patented flame retardant additive in our electrolyte.
EXPLOSION PROOF
Explosion proof Nickel plated steel
Every AMPTRON® cell is manufactured in our explosion proof Nickel plated steel prismatic case
Internal Features:
- Low Voltage Protection Switch - Automatically disconnects at 8V - 10V
- Over Voltage Protection Switch - Automatically disconnects at 15.8 - 14.6V
- Short Circuit Protection Switch - Automatically disconnects
- Reverse Polarity Protection Switch - Automatically disconnects
- Internal cell balancing - Automatically balances cells
- Charge Balancing - Independent balancing for multiple batteries connected in parallel or in series.
This Battery Protection System is designed to last throughout the life of the battery and provide reliable power for thousands of cycles.
CELL BALANCING
The BPS balances the cells by sending more current through the length way circuit boards and into cells with a lower voltage. The BPS will also discharge cells that exceed 3.65V during charging.
THERMAL FUSE
Internal Cell Safety Fuse
Our latest cell technology is manufactured with a internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
SAFETY VENT
High pressure safety vent
Each cell has a high pressure safety vent that will flip open to release energy and prevent explosion.
ELECTROLYTE
Flame Retardant Electrolyte
Our cells are manufactured with our patented flame retardant additive in our electrolyte.
EXPLOSION PROOF
Explosion proof Nickel plated steel
Every AMPTRON® cell is manufactured in our explosion proof Nickel plated steel prismatic case
WARRANTY
Limited Warranty : Batteries
AMPTRON® is the battery of choice for thousands of customers that rely on quality products to meet their expectations.
AMPTRON® is the battery of choice for thousands of customers that rely on quality products to meet their expectations.
MANUFACTURER'S LIMITED WARRANTY: BATTERIES
AMPTRON® warrants each AMPTRON® branded battery sold by AMPTRON® or any of its authorized dealers or distributors worldwide, to be free of defects from the date of sale for 4 years. The warranty period starts at the time of purchase. If the original receipt is lost, the warranty will be based on the battery date code. The warranty covers failure due to defects in material or workmanship. Subject to the issues listed below, AMPTRON® will repair or replace the battery and/or parts of the battery if the components in question are defective in materials or workmanship.
Not Covered by This Warranty:
Manufacturer is not obligated to warrant the AMPTRON® battery in question, if defects are related to damages caused by abuse/neglect, or from the following: - Damage from shipping, loose terminal bolts or corroded hardware - Manufacturer codes tampering or removal - Failure to properly install the battery, in addition to keeping the battery properly charged and maintained - Incorrect charging or discharging and sulphation - Breakage from collision, fire or freezing—which includes damage from extreme heat or cold, improper storage, water damage. AMPTRON’s warranty does not cover spent or worn out batteries or tampering. All bolts must be firmly tightened with a torque wrench and NOT by hand to avoid overheating caused by a loose connection. The warranty does not cover consequential damage or injury, discharged batteries, rental, freight, labour or administrative costs. Warranty replacement or repair will only occur after batteries are returned to base, tested and battery failure deemed to be a genuine claim.
Non- AMPTRON® Warranties:
AMPTRON® authorised dealers and distributors may offer an additional warranty to the Manufacturer’s Limited Warranty. Manufacturer is not responsible for dealer or distributor created warranties or any claims that may arise from said warranties.
Warranty Disclaimer:
Customers should adhere to all AMPTRON® documentation and guidelines. Manufacturer will not be responsible for any expenses related to installation/removal, electrical system tests, battery charging, loss of time or other expenses which should be considered incidental damages, including all shipping charges after the first 30 days of warranty.
There are no returns or exchanges accepted. Our zero return policy is effective at the time of purchase. As always, our commitment to excellent customer service is our top priority. Please contact us if you have further questions about our warranty and return policy. PLEASE NOTE - Customers are responsible for all shipping fee's following the first 30 days of purchases.
AMPTRON® warrants each AMPTRON® branded battery sold by AMPTRON® or any of its authorized dealers or distributors worldwide, to be free of defects from the date of sale for 4 years. The warranty period starts at the time of purchase. If the original receipt is lost, the warranty will be based on the battery date code. The warranty covers failure due to defects in material or workmanship. Subject to the issues listed below, AMPTRON® will repair or replace the battery and/or parts of the battery if the components in question are defective in materials or workmanship.
Not Covered by This Warranty:
Manufacturer is not obligated to warrant the AMPTRON® battery in question, if defects are related to damages caused by abuse/neglect, or from the following: - Damage from shipping, loose terminal bolts or corroded hardware - Manufacturer codes tampering or removal - Failure to properly install the battery, in addition to keeping the battery properly charged and maintained - Incorrect charging or discharging and sulphation - Breakage from collision, fire or freezing—which includes damage from extreme heat or cold, improper storage, water damage. AMPTRON’s warranty does not cover spent or worn out batteries or tampering. All bolts must be firmly tightened with a torque wrench and NOT by hand to avoid overheating caused by a loose connection. The warranty does not cover consequential damage or injury, discharged batteries, rental, freight, labour or administrative costs. Warranty replacement or repair will only occur after batteries are returned to base, tested and battery failure deemed to be a genuine claim.
Non- AMPTRON® Warranties:
AMPTRON® authorised dealers and distributors may offer an additional warranty to the Manufacturer’s Limited Warranty. Manufacturer is not responsible for dealer or distributor created warranties or any claims that may arise from said warranties.
Warranty Disclaimer:
Customers should adhere to all AMPTRON® documentation and guidelines. Manufacturer will not be responsible for any expenses related to installation/removal, electrical system tests, battery charging, loss of time or other expenses which should be considered incidental damages, including all shipping charges after the first 30 days of warranty.
There are no returns or exchanges accepted. Our zero return policy is effective at the time of purchase. As always, our commitment to excellent customer service is our top priority. Please contact us if you have further questions about our warranty and return policy. PLEASE NOTE - Customers are responsible for all shipping fee's following the first 30 days of purchases.