AU$ 145.00

12V/24V 20A MPPT SOLAR CHARGE CONTROLLER - Lithium compatible

This is an advanced high efficiency Multi-peak Maximum Power Point Tracking (MPPT) solar charge controller. The controller is customisable and compatible with several battery types including Lithium Iron Phosphate (LiFePO4) batteries. The controller supports temperature compensation and historical data storage to provide comprehensive monitoring of your solar system.

• The built-in Maximum Power Point Tracking algorithm increases the energy efficiency, typically 15% to 20% higher than traditional PWM charging efficiency. MPPT tracking efficiency up to 99.9% and energy conversion efficiency is as high as 98%. Advanced multi-peak tracking can accurately track the optimum    power with partial shading.
• The controller is compatible with Sealed Lead Acid, Gel, AGM and Lithium Iron Phosphate batteries.
• Current limited charging – if the charge current exceeds the rated current, the controller automatically reduces the charge current to the rated charging current.
• Can support capacitive load instantaneous high current start.
• Support automatic identification of battery voltage
• Fault LED indication and LCD abnormal information to facilitate fault finding.
• Supports historical data storage for up to one year.
• Supports standard MODBUS protocol for external communication purposes.
• All communications are electrically isolated.
• Built-in over temperature protection mechanism. The charging current and load will be decreased with temperature increase to reduce the controller’s temperature rise.
• Supports external battery voltage sampling in order to compensate for voltage drop and losses in the wiring, allowing more accurate setting of the control parameters.
• Supports temperature compensation by automatically adjusting or turning off the charge and     discharge parameters to avoid battery overheating to prolong battery life.

BUY NOW

Lighter, more compact & portable

Stable Voltage

Longer life-cycle & cost efficient

Faster to charge